ARRMA 1/10 SENTON 4×4 MEGA Short Course Truck Blue/Black (ARAD61BL)
Rugged, 1/10 4×4 fun!
ARRMA 1/10 SENTON 4×4 MEGA Short Course Truck Overview
- Tactic TTX300 3-channel transmitter.
- MEGA 12T brushed 550 motor.
- Electronics module with MEGA 35A ESC, ADS-5 steering servo and Tactic TR326 receiver.
- Easy-access drivetrain.
- Fixed length upper links.
- Servo horn with built-in servo saver.
- Power module with pinion indicators.
- Internal metal diff gears.
- 8.4V 7-cell 2400mAh NiMH battery.
- ADC-N7 7-cell NiMH wall charger.
- dBoots Fortress MT tires.
- Multi-spoke wheels.
- Oil-filled shocks.
- Extended height dirt defenders.
- Chassis height side rails.
- Full set of ball bearings.
ARRMA 1/10 SENTON 4×4 MEGA Short Course Truck Features
Chassis: Molded plastic with side impact nerf bars, chassis can hold
batteries ranging from a 6-cell NiMH to a 4S LiPo pack 6.50″
(165mm) long, and 2″ (51mm) wide
Drive: Four wheel with telescopic sliding composite driveshafts,
spring loaded center driveshaft ensures solid engagement with
front and rear gearbox inputs
Differentials: Composite case construction, 1M straight cut internal
gears eliminate shimming or meshing issues, diffs are lubricated
with grease, viscosity not specified by manufacturer
Suspension: Captured hinge pin type
Radio: 2.4GHz Tactic TTX300 3-channel with steering and throttle end
point adjustments, steering rate adjustment, user programmable
3rd channel, TR326 receiver with fail/safe
Steering Servo: ADS-5 waterproof case, 70oz/in (5kg-cm) of torque,
Motor: Brush equipped, Mega 12T 550 size
Electronic Speed Control: Arrma Mega, compatible with 550 size motors
down to 12 turns, handles 5-9 cell NiMH, or 2S LiPo (7.4V) LiPo
Shocks: Composite body, coil over, with keyed spring perch and
self bleed design, filled with 500cst silicone shock oil,
equivalent to around 40wt shock oil from other manufacturers
Shock Mounts: Molded plastic
Bumpers: Molded composite flexible plastic with shock absorbing
loops that attach bumpers to front and rear of chassis
Steering: Ball raced steering with fixed molded upper links, servo
Battery: 8.4V 2400mAh 7-cell NiMH hump configuration, T-plug
connector, secured in chassis with two hook and loop straps
Battery Charger: ADC-N7 wall charger
Battery Tray: 6.5×2.01×1.89″ (165x51x48mm) maximum battery dimensions
Body: Trimmed and printed
Wheels: Nylon construction, five spoke style, black in color, 14mm
hex, mounting bead: 2.2″ (56mm) outer x 3.0″ (76mm) inner
Tires: dBoots Fortress multi-surface with foam inserts 1.7″ (42mm)
wide, 4.1″ (104mm) overall diameter
Caster: Non-adjustable caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Non-Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Spur Gear: 48dp pitch 91 tooth, plastic construction
Pinion Gear: 48dp pitch 17 tooth, metal construction
Warranty: Two year limited warranty beginning at date of purchase
ARRMA 1/10 SENTON 4×4 MEGA Short Course Truck Includes
Assembled Senton Mega 4×4 Short Course Truck with Radio, 3-in-1
Unit, Trimmed Body, Battery, Charger and Instruction Manual
ARRMA 1/10 SENTON 4×4 MEGA Short Course Truck Requires
AA Batteries: Four(4) for transmitter
Track and maintenance equipment
ARRMA 1/10 SENTON 4×4 MEGA Short Course Truck Specifications
Length: 22″ (558mm)
Width: 11.7″ (298mm)
Height: 8.2″ (208mm)
Weight: 6.3lbs (2.9kg)
Ground Clearance: 1.26″ (32mm)
Standard Final Gear Ratio: 9.71 – 18.72
Front Shock Spring Rate: 82gf/mm
Rear Shock Spring Rate: 62gf/mm
Battery Dimensions: 5.5 x 2 x 1.9″ (140 x 51 x 48mm)
with battery mounting blocks in place
Max Battery Dimensions: 6.50 x 2 x 1.9″ (165 x 51 x 48mm)
with battery mounting blocks removed
Length: 20.7″ (527mm)
Width: 9.8″ (250mm) behind front wheels, narrowest point
11.6″ (296mm) at rear wheels, widest point
Height: 5.8″ (147mm)
If powering the vehicle with a 2S LiPo battery, the jumper on the
ESC MUST be set to LiPo mode.
Face the side of the ESC with the Battery Mode Indication Sticker
Place the jumper across the center and left pins when viewing this
*Some aftermarket batteries may require the removal of the Battery
Mounting Block for proper fit. This can be accomplished by
removing the 3x12mm screw that threads through the chassis and
Need more information about this product? We are here to help.
- Stop by Cincinnati’s Hobby Shop, Hobby Express (Click HERE for directions)
- Call us: 513-248-4666
- Be sure to follow us on Facebook at: www.facebook.com/hobbyohio
We are Cincinnati’s Premier Hobby Shop – Hobby Express